| Specifications: |
| Capacities |
|
| Swing over bed |
41.7" |
| Swing over cross slide |
29.5" |
| Swing over gap |
63.4" |
| Length of gap |
22.4" |
| Headstock |
|
| Spindle Speeds (12) |
9-600 6-400 4-300 3-200 2-100 |
| Hole thru spindle - available sizes |
6.1", 9", 12.2", 14.1", 20" |
| Spindle type |
A2-20 |
| Type of lubrication |
Geared pump |
| Bearing surface on bed |
30.375" |
| Chucks |
|
| Front - 4 jaw reverse solid jaw |
28" dia. |
| Spindle nose |
A2-11, A2-15, A2-20, A2-20, A2-25 |
| Rear - 4 jaw |
28" dia. |
| Spindle nose |
A2-20 |
| Threads and Feeds |
|
| Threads per inch - number/range |
(48) 1-15 |
| Metric threads - number/range |
(48) 2-30 |
| Module threads - number/range |
(32) 1-15 |
|
Longitudinal feeds - number/range |
.005 - .0756 |
| Cross feeds - number/range |
.0026 - .0378 |
|
Rapid traverse (longitudinal) |
96 IPM |
| Carriage and Apron |
|
| Carriage bearing on ways |
31.25" |
| Cross slide travel |
21.25" |
| Compound rest travel |
11.8" |
| Graduation of apron handwheel |
z.010" |
| Graduation of cross slide and compound |
.002" |
| Tailstock |
|
| Travel of spindle barrel |
11.8" |
| Diameter of spindle barrel |
4.9" |
| Tailstock center |
#6 MT |
| Bearing surface on ways |
18.5" |
| Bed |
|
| Width of bed |
22" |
| Drive and Motors |
|
| Type of input drive |
V-Belt |
| Main drive motor |
30 H.P. |
| Miscellaneous |
|
| Steady rest - min./max. capacity |
6" - 14" |
| Follow rest - min./max. capacity |
1 1/8" - 11 13/16" |
| Shipping weight (approx.) (120"cc) |
20,790 lbs. |
